We may earn a commission if you buy through links on this page, at no extra cost to you. This never affects which products we recommend. How we make money.
On this page 12 sections
Choose Bluetti for a compact station (Elite 30 V2, rated 7.8) or a 2 to 3 kWh one (Apex 300, rated 8.7, the highest of either brand); choose Anker SOLIX at 1 kWh, where the C1000 Gen 2 rates 8.0 against 6.4 for the Bluetti AC180, and for a whole-home station. Both brands use LiFePO4 batteries and give 5-year warranties on their current models.
The short answer: Anker SOLIX vs Bluetti
In Bluetti vs Anker, the winner changes with the size you need
- Choose Bluetti for a small station with AC outlets and fast charging (Elite 30 V2: 288 Wh, 600 W, 9.5 lb) or a large 120/240 V station with top marks for charging, output, solar and, in one setting, switchover (Apex 300).
- Choose Anker SOLIX for a 1 kWh station (C1000 Gen 2: 2,000 W, 10 ms switchover, 24.9 lb against the AC180's 35.3 lb) or a whole-home station with up to 26.9 kWh from one unit (F3800 Plus).
Anker SOLIX is the home energy line of Anker Innovations, the charger and power bank maker. Bluetti is a power station specialist with ranges from the small Elite series to the Apex home systems. They share no batteries or accessories, so expansion packs from one never fit the other.
Anker SOLIX vs Bluetti at a glance
Both give 5 years on current models; Bluetti publishes standby draw for most of its stations
| Feature | Anker SOLIX | Bluetti |
|---|---|---|
| Warranty | 5 years, all seven reviewed | 5 years on current models |
| Cycle rating | 3,000 to 6,000 | 2,500 to 6,000 |
| 1 kWh output | 2,000 W | 1,800 W (AC180) |
| 1 kWh switchover | 10 ms | 20 ms (AC180) |
| Biggest reviewed | 5,024 Wh, 120/240 V (S5000) | 2,765 Wh, 120/240 V (Apex 300) |
Anker SOLIX vs Bluetti lineups compared
Seven Anker SOLIX and five Bluetti stations reviewed, from under 300 Wh to 5 kWh
From Anker SOLIX we've reviewed the DC-only 288 Wh C300 DC, the 1 kWh C1000 Gen 2, the 2 kWh S2000 and C2000 Gen 2, the 3 kWh F3000, the 3.84 kWh F3800 Plus and the 5 kWh S5000.

From Bluetti we've reviewed the 288 Wh Elite 30 V2, the 268 Wh EB3A (an older model), the 1.15 kWh AC180, the 2.07 kWh Elite 200 V2 and the 2.76 kWh Apex 300.
Every model on this page uses LiFePO4 cells. The real differences are in output, charging, switchover and how far each one can grow.
Anker SOLIX vs Bluetti ratings by size: Bluetti leads two classes
Bluetti wins compact and large; Anker wins mid-size and has the only whole-home models
Our ratings come from each model's specs (how we rate) and are compared within a size class.
| Size | Anker SOLIX | Bluetti |
|---|---|---|
| Compact (under 1 kWh) | C300 DC 6.8 | Elite 30 V2 7.8, EB3A 6.2 |
| Mid-size (1 to 1.5 kWh) | C1000 Gen 2 8.0 | AC180 6.4 |
| Large (2 to 3 kWh) | C2000 Gen 2 7.5, F3000 7.4, S2000 4.6 | Apex 300 8.7, Elite 200 V2 6.4 |
| Whole-home (3.5 kWh and up) | F3800 Plus 7.8, S5000 7.2 | none reviewed |
- Compact: the Elite 30 V2 scores higher for output (600 W AC outlets; the C300 DC has none), wall charging (380 W vs 280 W) and solar (200 W vs 100 W). The C300 DC is lighter (6.17 lb vs 9.5 lb) and scores higher for portability. The EB3A loses points for its 2-year warranty and 2,500-cycle rating.
- Mid-size: the C1000 Gen 2 scores top marks for wall charging (1,600 W in UltraFast mode) and switchover (10 ms), and higher for output (2,000 W vs 1,800 W), solar (600 W vs 500 W) and portability. The AC180 holds a little more (1,152 Wh vs 1,024 Wh) and can pair with a Bluetti B80 battery in a limited Power Bank Mode, while the C1000 Gen 2 can't add batteries at all.
- Large: the Apex 300 scores full marks for wall charging (3,840 W in Turbo mode), output (3,840 W), solar (2,400 W) and switchover (0 ms in one setting). Its low marks are for portability (83.8 lb) and expansion. The F3000 scores higher for expansion (12,288 Wh per unit) and portability, but lower for charging and switchover (20 ms). The C2000 Gen 2 (7.5) scores full marks for switchover and battery life and expands to about 4 kWh. The S2000 scores zero for output and solar in this class (1,500 W, 400 W). The Elite 200 V2 can't add batteries. Two other 2 kWh models, Anker's original SOLIX C2000 and Bluetti's Elite 300, aren't in our reviews yet; the Elite 200 V2 review compares it with the C2000.
- Whole-home: Bluetti has no reviewed model at 3.5 kWh and up. Anker's F3800 Plus (6,000 W, 3,200 W solar) and S5000 (5,024 Wh, 10 ms switchover) fill that gap; see best whole-home battery backup for other brands.
Charging and solar: Anker SOLIX vs Bluetti
Bluetti's Turbo modes charge fast at most sizes; Anker leads at 1 kWh
Both brands offer faster charging modes you choose in the app or on the unit:
- 1 kWh: Anker quotes 49 minutes for the C1000 Gen 2 at 1,600 W in UltraFast mode (1,200 W normally). Bluetti quotes 80% in 45 minutes for the AC180 in Turbo mode at about 1,440 W, about 1.3 hours to full, and about 1.7 hours in its default Standard mode.
- Compact: Bluetti quotes about 70 minutes for the Elite 30 V2 at 380 W in Turbo; Anker quotes 80% in about an hour for the C300 DC through its two 140 W USB-C ports.
- Large: Bluetti quotes 80% in 45 minutes for the Apex 300 at 3,840 W in Turbo, which needs a 50 A cable sold separately; from a standard outlet it takes 1,800 W. Anker quotes under 3 hours for the F3000, at 1,800 W from the wall or 3,600 W through a TT-30R (RV) cable or 240 V EV adapter.

Solar input by model:
| Size | Anker SOLIX | Bluetti |
|---|---|---|
| Compact | C300 DC: 100 W | Elite 30 V2: 200 W; EB3A: 200 W |
| Mid-size | C1000 Gen 2: 600 W | AC180: 500 W |
| Large | F3000: 2,400 W; S2000: 400 W | Apex 300: 2,400 W; Elite 200 V2: 1,000 W |
| Whole-home | F3800 Plus: 3,200 W; S5000: 3,000 W | none reviewed |
Bluetti's mid-size and large stations take panels at 12–60 V; Anker's F3000, F3800 Plus and S5000 add high-voltage inputs that take panel strings up to 165 V Voc, which suits long series runs. See what size solar panel you need.
Backup (UPS) and expansion: Anker SOLIX vs Bluetti
Anker switches faster at 1 kWh; Bluetti's Apex 300 has a 0 ms setting
UPS switchover by model:
- 0 ms: Bluetti Apex 300, only with its 240 V setting on the two left 20 A outlets; otherwise 20 ms.
- 10 ms or faster: Anker C1000 Gen 2, S2000, S5000; Bluetti Elite 30 V2.
- 15 ms: Bluetti Elite 200 V2.
- 20 ms: Anker F3000, F3800 Plus; Bluetti AC180 (with its Grid Enhancement mode turned off, which Bluetti says is needed for UPS use).

For a desktop computer or network gear, 10 ms or less is the safer choice; see using a power station as a UPS.
Expansion, per station:
- Anker: the C300 DC, C1000 Gen 2 and S2000 can't add batteries. The C2000 Gen 2 takes one BP2000 (about 4 kWh), the F3000 takes up to three BP3000s (12,288 Wh), the F3800 Plus six BP3800s (about 26.9 kWh) and the S5000 up to five batteries (about 30 kWh).
- Bluetti: the Elite 30 V2, EB3A and Elite 200 V2 can't add batteries. The AC180 works with a B80 battery in Power Bank Mode (1,958 Wh together), and Bluetti lists the B230 and B300 as charging batteries for up to 4,224 Wh. The Apex 300 takes up to six B300K packs for 19,353.6 Wh per unit; Bluetti's 58 kWh figure needs three units linked through its Hub A1.
At 2 to 3 kWh, the Apex 300 grows further than the F3000 (about 19.4 kWh vs 12.3 kWh per unit). Above that, only Anker has a station in our reviews.
Surge and starting appliances: Anker lists surge ratings for its AC models: 3,000 W on the C1000 Gen 2, 7,200 W on the F3000 and 8,000 W on the S5000, which help motors and compressors start. Bluetti doesn't list surge for the AC180 or Apex 300; it lists "Power Lifting" instead (up to 2,700 W on the AC180, 3,840–7,680 W on the Apex 300), which runs resistive loads such as kettles at reduced power and doesn't help start a fridge or power tool. See surge vs continuous watts.
Standby draw: what each brand publishes
Bluetti states self-consumption for most models; it changes how long a fridge runs
A station uses some power just to keep its inverter on. Bluetti publishes this for most models: about 9 W on the Elite 30 V2, 10 W on the Elite 200 V2, 15 W on the AC180 and 20 W on the Apex 300. Anker gives about 6 W of active idle on the S2000 and 8.8 W on the S5000, but no figure for the C1000 Gen 2.

Our runtime estimates assume 10 W of idle draw for every station, so they're slightly generous for the AC180 and Apex 300. With the AC180's own 15 W figure, a 67 W fridge runs about 12.3 hours instead of 13 by our estimate. Bluetti's ECO mode turns AC output off at low loads to save power, so turn it off when running a fridge.
Battery life and warranty: Anker SOLIX vs Bluetti
Both give 5 years on current models; Apex 300, S2000 and S5000 lead at 6,000 cycles
- Anker SOLIX: 5 years on all seven models we've reviewed. Cycle ratings: 3,000+ (C300 DC, F3800 Plus), 4,000 (C1000 Gen 2, C2000 Gen 2, F3000) and 6,000 (S2000, S5000).
- Bluetti: 5 years on the Elite 30 V2, AC180, Elite 200 V2 and Apex 300; 2 years on the older EB3A. Cycle ratings: 2,500+ (EB3A), 3,000+ (Elite 30 V2, Elite 200 V2), 3,500+ (AC180) and 6,000 (Apex 300).

Where an end point is given, both brands count cycles to 80% of capacity, so those numbers compare directly; Anker gives none for the F3800 Plus and Bluetti none for the AC180. Cold weather: most models from both run down to −4°F and charge from 32°F. See how long portable power stations last and cold weather use.
Apps and smart features: Anker app vs Bluetti app
Both apps switch charging modes; Bluetti's adds backup and time-of-use modes on the Apex 300
The C1000 Gen 2, Elite 30 V2 and Apex 300 connect to a phone app over Wi-Fi and Bluetooth, and the AC180's charging modes are also set in Bluetti's app:
- Anker: UltraFast charging on the C1000 Gen 2 is switched on in the app, and its Time-of-Use mode is set there.
- Bluetti: the AC180's Silent, Standard and Turbo charging modes are set in the app. The Apex 300's app adds Backup and Time-of-Use modes.

Some settings change how the stations behave: Bluetti's Grid Enhancement mode slows the AC180's switchover, and its ECO mode can switch AC off under light loads. Anker's UltraFast mode works only when the battery is above 68°F.
Head-to-head: C1000 Gen 2 vs AC180
The AC180 holds 128 Wh more; the C1000 Gen 2 is 10.4 lb lighter and switches twice as fast
| Spec | Anker SOLIX C1000 Gen 2 | Bluetti AC180 |
|---|---|---|
| Capacity (Wh) | 1024 | 1152 |
| AC output, continuous (W) | 2000 | 1800 |
| AC charge time | 49 min (UltraFast) | 80% in 45 min |
| Max solar input (W) | 600 | 500 |
| Weight (lb) | 24.9 | 35.3 |
| Warranty (years) | 5 | 5 |
| Price | Check price | Check price |
Estimated runtimes: C1000 Gen 2 (1,024 Wh)
- Wi-Fi router (12 W, DC)3.3 days
- CPAP with humidifier, typical (56 W, AC)14 h
- Fridge (67 W average, AC)12 h
Estimated runtimes: AC180 (1,152 Wh)
- Wi-Fi router (12 W, DC)3.7 days
- CPAP with humidifier, typical (56 W, AC)15 h
- Fridge (67 W average, AC)13 h
The AC180 runs each device about 12% longer on its larger battery. The C1000 Gen 2 delivers 2,000 W against 1,800 W, takes 600 W of solar against 500 W, switches over in 10 ms against 20 ms, and weighs 24.9 lb against 35.3 lb. Bluetti rates the AC180 at 45 dB in Silent charging mode; Anker rates the C1000 Gen 2 at 20 dB without stating conditions. For a closer look at this size, see the Delta 3 Plus vs C1000 Gen 2 comparison.
Who should buy Anker SOLIX, and who should buy Bluetti
Bluetti for compact and 2 to 3 kWh, Anker SOLIX for 1 kWh and whole-home
Best Bluetti pick: 2 to 3 kWh home backup
Bluetti Apex 300
Pick it for home backup with 240 V loads, an RV with a 30 A or 50 A hookup, or large solar setups.
Pros
- 3,840 W at 120/240 V
- 80% in 45 min in Turbo (Bluetti)
- 0 ms switchover in one setting
Cons
- 83.8 lb
- Turbo charging needs a 50 A cable
Best Anker SOLIX pick: 1 kWh
Anker SOLIX C1000 Gen 2
Pick it for camping, CPAP use and desk backup where 1 kWh is enough.
Pros
- 2,000 W output
- 10 ms switchover
- 24.9 lb
Cons
- Not expandable
- 600 W solar input
Anker SOLIX strengths: 5 years on every model, 10 ms switchover on the C1000 Gen 2, S2000 and S5000, whole-home models up to 5 kWh. Limits: the C1000 Gen 2 and S2000 can't add batteries; the F3000 and F3800 Plus switch over in 20 ms.
Bluetti strengths: the highest-rated compact and large models of the two, published standby figures, fast Turbo charging, a 0 ms setting on the Apex 300. Limits: no whole-home model in our reviews, 20 ms switchover on the AC180, several settings (Grid Enhancement, ECO) that need changing for backup or fridge use.
- Camping and small loads: Bluetti Elite 30 V2. See our best small portable power stations.
- 1 kWh for camping, CPAP or a desk: Anker C1000 Gen 2. See best portable power stations for camping.
- Home backup at 2 to 3 kWh: Bluetti Apex 300. See best portable power stations for home backup.
- Whole-home: Anker F3800 Plus or S5000. See best whole-home battery backup.
Comparing more brands? See Anker SOLIX vs EcoFlow, Anker SOLIX vs Jackery, EcoFlow vs Bluetti, Jackery vs Bluetti and the best portable power stations across every brand.
FAQ
Anker SOLIX or Bluetti: questions buyers ask before choosing
Which is better, Anker or Bluetti?
It depends on size. Bluetti rates higher in our compact and large classes (Elite 30 V2 7.8, Apex 300 8.7); Anker SOLIX rates higher at 1 kWh (C1000 Gen 2 8.0 vs AC180 6.4) and is the only one of the two with whole-home models in our reviews.
Is Bluetti a good brand?
Yes. Its current models use LiFePO4 cells rated for 3,000 to 6,000 cycles to 80%, carry 5-year warranties, and the Apex 300 is the highest-rated station of either brand in our reviews.
Does Anker or Bluetti have the better warranty?
They're level on current models: 5 years from both. Bluetti's older EB3A had 2 years.
Do Anker and Bluetti batteries work together?
No. Expansion batteries and cables are brand-specific. Solar panels can cross over with the right adapter cable, within each input's voltage and current limits.
Anker or Bluetti for home backup?
At 2 to 3 kWh, Bluetti's Apex 300 (120/240 V, 0 ms in one setting, up to about 19.4 kWh per unit). For a whole-home station above that, Anker's F3800 Plus or S5000.
Is the Anker C1000 Gen 2 better than the Bluetti AC180?
In our ratings, yes: it charges faster, switches over in 10 ms instead of 20, delivers more output and weighs 10.4 lb less. The AC180 holds 128 Wh more.




