The Bluetti EB3A on a campsite picnic table at dusk
A 10 lb LiFePO4 station with 600 W of output.

Review

Bluetti EB3A Review (2026)

Bluetti EB3A review: 268 Wh LiFePO4, 600 W output with 1,200 W surge, 350 W wall charging and 200 W solar. Runtimes, limits and who it suits.

We may earn a commission if you buy through links on this page, at no extra cost to you. This never affects which products we recommend. How we make money.

On this page 8 sections

Our verdict · Bluetti

6.2/106.2/10How we rate

A 10 lb LiFePO4 station with 600 W of output

The EB3A packs 600 W of output into a 10 lb LiFePO4 station that charges fast from the wall. Its 2-year warranty is shorter than most newer models offer.

Capacity
268 Wh
AC output
600 W
Wall charge
80% in about 30 min
Weight
10.1 lb

Best for

Camping, devices and lights, and small appliances under 600 W.

Skip it if

You want a long warranty, a stated UPS switchover time, or a fridge for more than a few hours.

  • 600 W output with 1,200 W surge
  • LiFePO4, 2,500+ cycles to 80%
  • 350 W wall charging, 430 W with solar added
  • 10.1 lb
  • 2-year warranty
  • No stated UPS switchover time
  • Not expandable
Rating breakdown (compact (under 1 kwh) class)
CriterionWeightScoreBased on
Wall charging speed20%8.4350 W input
AC output20%10.0600 W
Solar input10%9.1200 W
Portability25%2.627 Wh/lb
Battery life & warranty25%4.02-year warranty, 2,500+ cycles
Bluetti EB3A specifications
Capacity (Wh)268
Battery chemistryLiFePO4
Rated cycle life2,500+ cycles to 80%
AC output, continuous (W)600
AC output, surge (W)1200
AC charge time80% in about 30 min (430 W AC + solar)
Max AC charging input (W)350
Max solar input (W)200
Solar input voltage range—
UPS switchover (ms)Not stated (EPS)
Weight (lb)10.1
Expandable to (Wh)Not expandable
Warranty (years)2

Key specs at a glance

What the numbers mean in practice

  • 268 Wh capacity: a router for about 11 hours, or a CPAP without the humidifier for nearly 3 nights on DC.
  • 600 W output, 1,200 W surge: covers laptops, fans, a TV and small appliances.
  • LiFePO4, 2,500+ cycles to 80%: see LiFePO4 vs lithium-ion.
  • 10.1 lb: easy to carry.
  • Not expandable; 2-year warranty.

Spec sheets are easy to misread; watts vs watt-hours explains which number answers which question.

Charging speed

350 W from the wall, 430 W with solar

It takes up to 350 W from a wall outlet. With solar added at the same time, input reaches 430 W, and Bluetti quotes about 30 minutes to 80%.

The Bluetti EB3A charging from a folding solar panel on a patio
350 W from the wall, up to 430 W with solar added.

On its own, solar input tops out at 200 W. It also charges from a car. See solar panel sizing.

Capacity and real runtime

Devices, lights and a CPAP

The Bluetti EB3A powering a lamp and charging a phone at night
Enough for devices, lights and a CPAP without the humidifier.

Estimated runtimes on the EB3A

  • CPAP, no humidifier, DC (11 W)22 h
  • Wi-Fi router, AC (12 W)11 h
  • Laptop, AC (60 W)3.3 h
  • Fridge, average draw (67 W)3.0 h
268 Wh at 85% efficiency for AC plus 10 W inverter draw, and 92% for DC.

It's a devices-and-lights station: a fridge lasts about 3 hours. See how long a power station runs a CPAP, or try the runtime calculator.

Output: what it can and can't run

600 W across nine outputs

Two 120 V AC outlets share 600 W, with a 1,200 W surge. There are nine outputs in all, including a 100 W USB-C port, a car socket and a wireless charging pad.

A plug in one of the AC outlets on the Bluetti EB3A
Two AC outlets share 600 W, with a 1,200 W surge.

It runs laptops, monitors, fans, lights, a TV and small kitchen gadgets under 600 W. It won't run a kettle, microwave or space heater.

Backup (UPS) and app

EPS mode, switchover time not stated

Bluetti describes "24/7 EPS": plugged into the wall, it powers your devices and switches to battery if the grid drops. It doesn't publish a switchover time, so we can't say whether a computer will stay on. See using a power station as a UPS.

The Bluetti EB3A beside a desk, plugged into the wall and powering a router and laptop
In EPS mode it powers devices from the wall and switches to battery if the power drops.

It works with the Bluetti app over Bluetooth.

How it compares

Against other small stations

SpecBluetti EB3AEcoFlow River 3 PlusJackery Explorer 300
Capacity (Wh)268286293
AC output, continuous (W)600600300
AC charge time80% in about 30 min (430 W AC + solar)1 hr (0–100%)4 h
Max solar input (W)200220100
Weight (lb)10.110.47.1
Warranty (years)253 + 2 with registration
PriceCheck priceCheck priceCheck price
  • EcoFlow River 3 Plus: same 600 W at 286 Wh, with under 10 ms switchover, a 5-year warranty and expansion to 858 Wh.
  • Jackery Explorer 300: 293 Wh but only 300 W, with an older NMC battery.
  • Anker SOLIX C300 DC: 288 Wh with fast USB-C, but no AC outlets.
  • Bluetti Elite 30 V2: 288 Wh and 600 W in 9.5 lb, with a LiFePO4 battery, a 10 ms or faster switchover and a 5-year warranty, but it can't take extra batteries.

Who should buy it

And who should look elsewhere

Good fit: campers and travellers who want 600 W in a 10 lb LiFePO4 station.

Look elsewhere if: you want a long warranty or a stated UPS switchover. The River 3 Plus covers both.

FAQ

Can the EB3A run a CPAP?

Yes. Without the humidifier, it runs an 11 W CPAP on DC for about 22 hours, nearly three nights.

Can the EB3A run a fridge?

For about 3 hours at a 67 W average draw.

How fast does the EB3A charge?

Up to 350 W from the wall, or 430 W with solar added, for about 30 minutes to 80%.

Does the EB3A work as a UPS?

It has an EPS mode, but Bluetti doesn't state the switchover time.